Product certification European Union EC Certificate of Conformity CE marking CE mark testing of the EU harmonized European standards RoHS

INSTITUTE OF OCCUPATIONAL SAFETY AND ENVIRONMENTAL PROTECTION - IVD

EU ACCREDITED TEST & CERTIFICATION BODY
INSTITUTE OF OCCUPATIONAL SAFETY AND ENVIRONMENTAL PROTECTION - IVD
European product certification
Directive New and Global approach of the European Union
CE Mark
ATEX equipment and protective systems intended for use in potentially explosive atmospheres
Directive 2006/42/EC of the machinery
Directive 2014/30/EU Electromagnetic compatibility (Directive EMC)
Conformity assessment
EN ISO 12100:2010 Safety of machinery.
Directive 2014/35/EU) (2006/95/EC (ex-73/23/EEC) Low voltage
Directive 2014/30/EU (2004/108/EC) Electromagnetic compatibility Directive EMC
European standards for machines and mechanisms
harmonized standards, engineering
Directive 2011/65/EU, RoHS Compliance
General Product Safety Directive 2001/95/EC (GPSD)
REGULATION (EC) No. 765/2008, DECISION NO. 768/2008/EC Regulation (EC) No. 764/2008
Testing Service
Issued Certificate Query
INSTITUTE OF OCCUPATIONAL SAFETY AND ENVIRONMENTAL PROTECTION - IVD
Valvasorjeva ulica 73 2000 MARIBOR Slovenia
Phone : +386:2:42116012
Fax : +386:2:42116060
Email :office@ivdeu.com
Website :www.ivdeu.com

ATEX equipment and protective systems intended for use in potentially explosive atmospheres

 DIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast)

Products
Procedures
Articles/Annexes
Group I electrical:
   - - Category M1 equipment
   - - Category M2 equipment
   - - Protective systems
   - - Safety devices, controlling devices and regulating devices
   - - Components
Group I non-electrical:
   - - Category M1 equipment
   - - Category M2 equipment
   - - Protective systems
   - - Safety devices, controlling devices and regulating devices
   - - Components
Group II gas electrical:
   - - Category 1 equipment
   - - Category 2 equipment
   - - Category 3 equipment
   - - Protective systems
   - - Safety devices, controlling devices and regulating devices
   - - Components
Group II dust electrical:
   - - Category 1 equipment
   - - Category 2 equipment
   - - Category 3 equipment
   - - Protective systems
   - - Safety devices, controlling devices and regulating devices
   - - Components
Group II gas non-electrical:
   - - Category 1 equipment
   - - Category 2 equipment
   - - Category 3 equipment
   - - Protective systems
   - - Safety devices, controlling devices and regulating devices
   - - Components
Group II dust non-electrical:
   - - Category 1 equipment
   - - Category 2 equipment
   - - Category 3 equipment
   - - Protective systems
   - - Safety devices, controlling devices and regulating devices
   - - Components
EU-type examination (Module B)
Conformity to type based on quality assurance of the production process (Module D)
Conformity to type based on product verification (Module F)
Conformity to type based on internal production control plus supervised product testing (Module C1)
Conformity to type based on product quality assurance (Module E)
Conformity based on unit verification (Module G)
Annex III
Annex IV
Annex V
Annex VI
Annex VII
Annex IX
© 2017, INSTITUTE OF OCCUPATIONAL SAFETY AND ENVIRONMENTAL PROTECTION - IVD. All rights reserved.
Made by webmaster.si